Raychem nVent HWAT-ECO V5 (EU), Инструкция по установке, эксплуатации и обслуживанию

Страница: 11 / 24

EN
Approval
Approval
CE, UKCA, EMC According to EN 50081 - 1 / 2
for emission and EN 50082 - 1 / 2 for immunity
Temperature for bal pr 100 °C test (DIN
EN 60730 /VDE 0631 - 1 )
Rated impulse voltage: Overvoltage category III
(DIN EN 60730 / VDE 0631 - 1 )
4. OPERATION
The HWAT-ECO version 5 has a resistive touchscreen user interface:
The unit will go in dim mode after 2 minutes with no interaction.
The unit will switch to the main screen after 2 minutes of no-interaction
on the parameter input screens.
4.1 Quick install
When the unit is powered up for the first time, a quick setup must be
executed before the unit is ready to start. The Quick start helps to set all
important settings, the unit will go in main screen mode automatically
when done. Quick start is sufficient for normal operations. More settings
are available in the Setup menu for special installation conditions.
4.2 Programme start
Quick star
t Language
selection
Select your language from the language
menu.
Connection check
The unit is automatically executing a
connection check. It will check the heating
cable connection, boiler sensor and pipe
sensor connection.
A connection of the unit to an external
relay needs to be confirmed by the user.
Boiler sensor and pipe sensor are optional
connections. If connected, they will
automatically switch on.
Fine-tune the sensor inputs in the parameter
settings.The unit also operates in mode
without sensors.
Country
selection
Select a country in this menu. Your selection
will define the default values for time format,
pipe diameter and insulation thickness.
Date input
Use the up/down arrow keys to select the
year.
Time input
Use the up/down arrow keys to set
the hour and minute.
Building type
programme
The HWAT-ECO has 7 default timer
programmes. Select a programme by tapping
on the corresponding box (box will turn red).
Select cable type Select the installed HWAT heating cable.
Plumbing
settings
Default values are set for selected plumbing
set values. Change the default values by
clicking on the arrow sign for each value and
enter a new value.
Heating cable selection
Select the type of cable used in your
installation (HWAT-L,HWAT-M,HWAT-R).
nVent.com/RAYCHEM
|
11