11
ENGLISH
INSTRUCTIONS
Introduction
To get the most out of your new winch puller,
please read these instructions and the safety
instructions before use. Please also save the-
instructions in case you need to refer to them at a
later date.
Technical specifications
Max. load:
4,000 kg
Special safety instructions
Only use the winch puller for towing.
Always hold the wire taut when you loosen or
tighten the winch puller.
Always be aware how heavy the load is. Do not
exceed the maximum permitted load of the winch
puller!
Always use a suitable sling, towing eye or similar to
secure the hook of the winch puller to the object
that is to be towed.
Do not tighten the wire too firmly round the load.
Do not hook the winch puller firmly to the wire in
order to form a loop.
Never use a winch puller with damaged wire or
ratchet.
Never tow the load round a corner, always in a
straight line.
Do not extend the winch puller handle.
Use
Secure the hook of the winch puller on the pulley
to a point that is strong and solid enough to be
able to bear the load when you tow it.
Press the tab spring in the direction of arrow A in
figure 1, and lift and hold the handle.
Press the lock tab in the direction of arrow B in
figure 1, and pull as much wire out as necessary.
Secure the fixed hook of the winch puller to a
towing eye or another suitable point on the load.
Press the tab spring in the direction of arrow A in
figure 2, so it engages with the gear wheel of the
ratchet. Pull the handle back and forth to tighten
the wire and move the load.
Gear wheel of
the ratchet
Tab spring
Fig. 2
Tab
Tab spring
Lock tab
Towing eye
Fig. 1
Tab
A
B
