Service Manual
Troubleshooting
dĞƌŵŝŶĂƚŽƌ^ĂůǀĂƚŝŽŶΡŽƉLJƌŝŐŚƚΞϮϬ
10 T Asset Acquisition Company, LLC
Page 50
Troubleshooting
Warning
: Review safety chapter before making any adjustments to game.
Problem
Possible Cause
Solution
Game will not power up.
Game not plugged in
Plug game into AC outlet.
Game not turned on
Turn on main power switch.
Game fuse is blown.
Check and replace fuse.
No power to receptacle
Test AC outlet and plug game into
powered outlet.
PC not turned on.
Turn PC power switch on. Ensure
IEC cable tightly plugged in. Trace
cable back to source to ensure
continuity.
PC
BIOS
set
incorrectly.
See BIOS Settings chapter.
Scrambled or scrolling display
Sync polarity incorrect.
Change DIP switch settings for
HSYNC and VSYNC.
NO VIDEO
message
Video cables not plugged in properly
Reattach and tighten power and
video cable to monitor.
No sound
Bad connection
Check connection to speakers.
Cold cathode tubes flicker or fail to
light.
Bad connection
Check for snug connection at
inverter or under topper bracket.
Loose
end
caps
Tighten end caps.
Game does not load.
Hard
ĚƌŝǀĞƚĞƐƚƌĞƉŽƌƚƐ͞ďĂĚ͟Žƌ
͞ŵŝƐƐŝŶŐ͟ĨŝůĞƐ͘
Game fails to finish loading.
Hard drive failure
Recover hard drive.
After resetting, game still reports an
error.
See Hard Drive Recovery procedure
in Maintenance section.
Game suggests inserting a boot
DVD.
Erratic game mode or attract mode.
WARNING!
Data Files Corrupted.
(Game Operation May Become
Unstable.)
hƐĞ͞dĞƐƚ͟^ǁŝƚĐŚƚŽŶƚĞƌdĞƐƚ
Mode
ĂŶĚZƵŶ͞&ŝůĞdĞƐƚ͘͟
Press Start To Continue.