Service Manual
Setup
dĞƌŵŝŶĂƚŽƌ^ĂůǀĂƚŝŽŶΡŽƉLJƌŝŐŚƚΞϮϬ
10 T Asset Acquisition Company, LLC
Page 10
Startup Game
1.
Plug in line cord to AC outlet.
2.
Turn the power switch to ON.
3.
Verify that the cooling fan located on the bottom back of the game is working.
If not, turn off AC power and disconnect line cord. Refer to the diagnostic section of this manual.
4.
Check that no component is excessively hot or emitting foul odors.
If not, turn off AC power and disconnect line cord. Refer to the diagnostic section of this manual.
5.
Once software loads, you will be asked to calibrate the guns.
If not, enter the service menu by pressing the TEST button located on the bracket inside the top
coin door.
Note that gun maintenance procedure is listed on page 34.