Raw Thrills Jurassic Park Arcade, Руководство оператора

Страница: 20 / 36

Operator’s Manual
Jurassic Park ™© is a trademark and copyright of Universal Studios and Amblin Entertainment, Inc. Licensed by Universal Studios
Licensing LLC. All rights reserved. Jurassic Park Arcade Game Software Copyright 2014 Raw Thrills, Inc. All rights reserved.
Page | 20
Game resets Bad file or bad 5V RIO fuse. Run File Test. Restore hard drive.
Replace 5V fuse on RIO pcb.
Problem Possible Cause Solution
Guns won’t register or function
poorly
Bad calibration Calibrate guns.
Dirty/damaged potentiometers Inspect and or replace potentiomer
Gun/pot. disconnected Check gun/pot connections.
Coin meter does not click during
Test
No pulse to meter Check all wiring from meter to I/O
board
Faulty meter Replace coin meter
Exits Test Mode every 3 seconds Test button stuck in ON position Slide or toggle button off after Test
Menu appears
Dongle Not Present Dongle missing or disconnected Find dongle USB connection and
reseat in USB port
Faulty USB port Connect dongle to another USB port
Connect I/O Board or
I/O Board Missing
USB cable disconnected Check USB connection from PC to
I/O board
Try connecting to a different USB
port
Blown fuse Verify 5V and 12V fuses are not
blown
No power to RIO board Check for proper voltage
(+5V, +12V) at RIO P2 connector
Bad RIO Board Replace RIO board with known
functional board
Missing Field/Earth Ground Check AC line cord for missing or
damaged ground plug or
connection. Use only properly
grounded AC power outlet.
Guns not vibrating Bad fuse or 24VDC power supply.
Bad recoil pcb.
Verify parts are bad and replace.
Seat subwoofer sound is weak. Low voltage on 12V power supply.
Volume set too low.
Adjust power supply voltage.
Set Volume for desired vibration
effect.
Light feature is not lighting up. Bad connection or damaged wires.
Bad fuse or power supply. SEE FUSE
CHART.
Replace or repair damaged wires or
connectors.
Replace bad fuse with correct value.