Raw Thrills Jurassic Park Arcade, Руководство оператора

Страница: 4 / 36

Operator’s Manual
Jurassic Park ™© is a trademark and copyright of Universal Studios and Amblin Entertainment, Inc. Licensed by Universal Studios
Licensing LLC. All rights reserved. Jurassic Park Arcade Game Software Copyright 2014 Raw Thrills, Inc. All rights reserved.
Page | 4
Safety
O
PERATION
Before operating game, read this manual. Failure to properly install and operate this game could result in
malfunction or accident. Operate the game in accordance with the manual.
T
RANSPORTING
Cabinet is very heavy and contains fragile components. Use appropriate care when moving or transporting cabinet.
Avoid rough handling.
H
ANDLING
C
OMPONENTS
Many components are extremely sensitive to handling, environmental and Electrostatic Discharge (ESD) events—
especially the computer. Do not handle it roughly. Before servicing, call your distributor and inquire about the PC
warranty. Use proper ESD procedures when servicing. Protect components from harmful environmental
conditions, such as extreme temperatures, excessive moisture or other damaging effects.
D
ISCONNECT POWER
Always turn off power and unplug the unit before servicing or making adjustments, unless otherwise instructed.
Installing or repairing components while power is on can damage the components and void the warranty.
G
ROUNDING
Avoid electrical shock. Do not plug in AC power until you have inspected and properly grounded the unit. Only plug
into a grounded, three ‐ wire outlet. Do not use a “cheater” plug or cut off the ground pin on the line cord.
E
LECTRICAL
S
HOCKS
There is no isolation transformer in the cabinet. Disconnect AC power before servicing. However, be aware that
lethal voltages can remain in the electronic components even when AC power is disconnected. Use extreme
caution when servicing. Verify that there is a working ground connection. If the unit sustains water damage, cease
using it immediately and unplug AC power.
M
ONITOR
Extremely high voltages exist in the monitor at all times. These high voltages exist even when the monitor is off
and the AC line cord is disconnected. These voltages are extremely lethal and will cause death. The monitor
contains no user serviceable parts. Do not attempt to service the monitor.
P
OWER
S
ELECTOR
Before installing game, ensure the voltage on the PC is set properly. There is a 115/230 VAC selector switch that
must be set for the correct voltage for your site. Verify the fluorescent lamp rating. The rating must match the line
voltage at the installation site.
C
ONNECTORS
Ensure all connectors mate properly. If connectors do not slip in easily, do not force them. Connectors are often
keyed and only connect one way. Check for correct orientation.