Raw Thrills Jurassic Park Arcade, Руководство оператора

Страница: 19 / 36

Operator’s Manual
Jurassic Park ™© is a trademark and copyright of Universal Studios and Amblin Entertainment, Inc. Licensed by Universal Studios
Licensing LLC. All rights reserved. Jurassic Park Arcade Game Software Copyright 2014 Raw Thrills, Inc. All rights reserved.
Page | 19
Troubleshooting
Warning: Review safety chapter before making any adjustments to game.
General Troubleshooting
Problem Possible Cause Solution
Game will not power up Game not plugged in. Plug game into outlet.
Game not turned on. Turn on main power switch.
Game fuse is blown. Check and replace fuse.
No power to receptacle. Test outlet and plug game into
powered outlet.
PC not turned on. Turn PC power switch on. Ensure
IEC cable tightly plugged in. Trace
cable back to source to ensure
continuity.
PC BIOS set incorrectly. See BIOS Settings chapter.
Screen not powering on with game No AC power or bad video cable Check loose or bad AC or video
connection
NO VIDEO message Video cables not plugged in properly
PC did not power up
Reattach and/or tighten video cable
to monitor.
Reattach and/or tighten video cable
to PC. Power cycle PC or game
Faulty video cable Replace video cable
PC not turned on. Turn PC power switch on.
No sound Bad Connection from PC to RIO
audio or bad speaker connection.
Check connection ¼” stereo cable
from PC to RIO and speakers.
Game does not load
Hard drive test reports “bad” or
“missing” files.
Game fails to finish loading. Hard drive failure Recover hard drive.
After resetting, game still reports an
error.
Game suggests inserting a boot
DVD.
Erratic game mode or attract mode.
WARNING!
Data Files Corrupted.
(Game Operation May Become
Unstable.)
Use “Test” Switch to Enter Test
Mode
and Run “File Test.”
Press Start To Continue.