Raven SmarTrax MD, Руководство по установке

Страница: 27 / 36

P/N 016-5030-063 Rev. B 23
Node and Wiring Installation
Install the Foot Switch
FIGURE 4.
Foot Switch Installed
1.
Select a suitable location for the foot switch (P/N 063-0173-593) to be installed.
Note:
The foot switch should be installed in a location where the operator has easy access to it and is
able to fully press the pedal.
2.
Using the holes in the foot switch as a template, drill holes in the floor of the cab.
3.
Secure the foot switch to the floor by installing the supplied screws in each of the mounting holes.
Install the Node Harness
FIGURE 5.
Node Harness Connected to Node
1.
Install the two large, rectangular connectors of the node harness (P/N 115-4001-157) into the correct ports
of the node (P/N 063-4001-013).
2.
Tighten the bolts on the harness connectors to secure the connections.
3.
Connect the female 4-pin Deutsch connector on the node harness to the installed foot switch (P/N 063-
0173-593) cable connector.