Raven SC1, Руководство по калибровке и эксплуатации

Страница: 47 / 79

Implement Settings and Tuning: Steering Setup Tab 43
IMPLEMENT SETTINGS AND TUNING
2. Select the Steering Setup tab and the Disengage Engage Settings button. The following information is
displayed on the page:
• Engagement Type - Use the drop down list to select how the implement steering system should be engaged
during operation. Select:
•
Tractor Linked - implement follows tractor engage status
•
Height Switch - implement engages when implement is lowered
•
Field Computer Only - implement engages via the UT independent from machine engage status
• Auto Center - Determine if the implement will return to center after disengage.
• Engage Delay - Defines how long before the implement will start steering after engage status change.
3. Select the Accept button in the lower, right corner of the screen to return to the Steering Setup tab.
GUIDANCE SETUP MENU
This menu allows the operator to switch guidance partners. If a Raven VSN™ visual guidance system is connected,
the Guidance Setup menu will set the guidance mode and row guidance.
FIGURE 18. Guidance Setup Menu
To access Guidance Setup settings:
1. From the SC1/TC1 Home screen, select the Tools Menu button.
2. Select the Steering Setup tab and the Guidance Setup button. The following information is displayed on the
page:
• Guidance Partner - Use the drop-down list to select the Guidance Partner. Select:
•
Raven Field Computer - SC1 is receiving the guidance line from a CR7 or CR12 field computer
• Guidance Mode - Use the drop-down list to select the desired Guidance Mode:
•
GPS - Guidance is performed via GPS guidance points only
3. Select the Accept button to complete the guidance setup.