Raven MPV-7100 Скачать руководство пользователя страница 49

Страница: 49 / 52

WWW. RAVENAMERI C A. C OM

arranty

& r

egIstratIon

Exclusions: This warranty does not cover: normal wear; contaminants in the fuel or oil; damage as a result of use in

a manner for which the product was not designed; damage caused by modification or use of unsuitable attachments

or accessories, or other misuse and neglect; damage caused by failure to follow the prescribed warnings, operating

practices, maintenance, and storage procedures; parts affected or damaged by accident and/or collision; damage due

to transporting, handling, storage or any other causes other than defects in material or workmanship of the product.

In the event you have a claim under this Warranty, you must work with an authorized service location.

Should you have any unanswered questions concerning this Warranty, please contact 1-888-321-5700 with the model

number, serial number and date of purchase of your

product.

T H I S WARRANT Y D OES NOT APPLY T O I NC I D ENT AL OR C ONSEQ UENT I AL D AMAG ES AND ANY I MPLI ED

WARRANT I ES ARE LI MI T ED T O T H E SAME T I ME PERI OD S ST AT ED H EREI N F OR OUR EX PRESSED WARRANT I ES.

Some areas do not allow the limitation of consequential damages or limitations of how long an implied Warranty may last,

so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may

have other rights which vary from locale to locale.

Product Registration

Thank you for your Purchase. To ensure you receive up to the minute information regarding your MPV in the event of

product updates, please register your MPV within 30 days of purchase.

Your information will be held in confidence and not sold to third parties for any reason. While registration provides benefits

of current and future product knowledge, it does not void or diminish your warranty rights.

Please complete the included registration card, or register on-line at www.ravenamerica.com.

Please visit:

http://www.ravenamerica.com/

Or call: 1-888-321-5700

Or write to:

Denver Global Products

1000 E. Powell Drive

Lincolnton, NC 28092

4 9

Содержание MPV-7100





















































Результаты поиска

Содержание MPV-7100

Отзывы:

Похожие инструкции для MPV-7100

Бренды по названию

Популярные бренды

Raven MPV-7100, Руководство владельца и эксплуатации

Результаты поиска

Содержание MPV-7100

Отзывы:

Похожие инструкции для MPV-7100

Бренды по названию

Популярные бренды