CHAPTER
3
016-0230-129 Rev. B
15
CHAPTER 3
HYDRAULIC SYSTEM
INSTALLATION
INSTALL FITTINGS ON THE AUTOBOOM VALVE
Before mounting the AutoBoom valve on the machine, install the proper fittings in the valve. This prepares the
valve for installation and simplifies the hose connection process later in the procedure.
WARNING
The machine must remain stationary and
switched off, with the booms unfolded and
supported, during installation or maintenance.
CAUTION
When installing AutoBoom hydraulics or
performing diagnostics, maintenance, or routine
service, ensure precautions are taken to prevent
any foreign material from being introduced into
the machine hydraulic system.
Objects or materials that are able to bypass the
machine hydraulic filtration system will reduce
performance and possibly cause damage to the
AutoBoom hydraulic valve.
NOTICE
The appearance of the AutoBoom hydraulic valve
may vary slightly from the images contained in
this manual. However, the fittings, hose
connections, and cable connections remain the
same.
