Raven DCS 300, Инструкция по установке и обслуживанию, Страница: 12 / 27

8
Selects power ON or OFF.
CONSOLE FEATURES
IMPORTANT: IMPORTANT: IMPORTANT: IMPORTANT: IMPORTANT: This Console requires selection of US US US US US (gallons) or SI SI SI SI SI [liters]; and
C-Sd C-Sd
C-Sd C-Sd
C-Sd (Standard Valve) or C-FC C-FC
C-FC C-FC
C-FC (Fast Close Valve). Hold DAY VOLUME key to view
selections.
Console Revision can be determined by
letter stamped in REV box on label.
Console Program is determined by letter
stamped in PGM box on label.
Displays actual rate of application,
calibration, and function data.
ENTER -Used only to enter data into
the Console.
Alarm indicator light.
CE -Use like you do the CE key on a
calculator.
KEY SWITCH -Key must be in and turned
horizontal to enter data into Con-
sole. Key turned vertical and then
removed puts Console in operate mode.
See NOTE below. See NOTE below. See NOTE below. See NOTE below. See NOTE below.
CALIBRATION KEYS -- Used to enter data into the
Console to calibrate the system.
METER CAL -- Flow Meter Calibration Number
LIQ CAL -- Target Application Rate
GRAN CAL -- Determined by Encoder and System
FUNCTION KEYS -- Used to Display Data
DATA -- Turn Alarm ON/OFF
GRAN TOTAL -- Total Granular Applied
LIQ/GRAN -- Actual Application Rate
LIQ VOL/TANK -- Volume Remaining in Tank
SELF TEST -- Simulate Granular Output
TOTAL VOLUME -- Total Volume Applied
DAY VOLUME -- Total Volume Applied for Day
NOTE: NOTE: NOTE: NOTE: NOTE: The KEY SWITCH needs to be in the vertical position to allow operation of main
ON/OFF Valve or to turn the pump ON. The maximum rating of this switch is 4 AMPS.
If the main ON/OFF Valve or pump could draw current in excess of 4 AMPS, an external
relay must be added to prevent damage to the KEY SWITCH.