22
2. Press the Add Machine button
. The Select Machine window will open.
3. Press Create New Machine.
4. Select the machine type. Available options are:
• Traditional
• Self Propelled
• Articulated
• Tracked
NOTE:
During machine configuration, if creating a self-propelled machine with
an ISO boom connected to the CANBUS, select the ISO Boom instead of
creating a new boom.
NOTE:
During machine configuration, if selecting a SCS, select the desired SCS
instead of creating a new boom.
5. Enter the machine name in the <enter name> field.
6. Press Next
. The Antenna Height Above Ground window will open.
7. Enter the Height from the ground to the center of the antenna.
8. Press Next
. The Distance: Antenna Offset From Center will open.
9. Enter the distance the antenna is offset from the center of the implement.
10. Select if the offset distance is to the Left or Right of center.
11. Press Next
. The Distance: Rear Axle to Antenna window will open.
12. Enter the distance from the center of the rear axle to the center of the antenna.
13. Select if the distance is Ahead of or Behind the axle.
NOTE:
If an Articulated machine, select if the antenna is in front of or behind
the articulation point.
If a Tracked machine, select if the antenna is in front of or behind the
track center.
14. Press Next. For Articulated Tractors, enter The Distance:Rear Axle to Pivot.
NOTE:
This allows the CRX to calculate the correct position of the implement
for determining the coverage rate and boom control functions.
15. Enter the distance from the pivot point to the center of the rear axle.