C
HAPTER
3
14 RoGator (Liquid/AirMax 180) & TerraGator (Liquid/AirMax/AirSpread) AccuBoom™ Installation Manual
FIGURE 7. CANbus Terminator Location
7. Remove the panel cover located to the right of the radio.
NOTE:
If a CAN SmarTrax node was previously installed, the CAN terminator may be located elsewhere in the
cab or access panel.
8. Remove the CAN terminator from the existing location and attach it to the AccuBoom control cable.
9. Route the CANbus lead from the AccuBoom control cable to the existing CANbus connector and connect.
NOTE:
If the connection near the radio is being used, the cab upright cover may need to be removed to
neatly route the cable to the connection point.
10. Replace the panel cover.
11. Replace the access panel cover located on the right-rear corner of the outside of the cab.
