3
Manual No. 016-1001-063 Rev. E
13
ACCUBOOM INSTALLATION
FIGURE 5. High Current Power/Ground
1. Route the power leads (High Current) on the AccuBoom control cable to the main power and ground studs in
the access panel.
2. Connect the power lead to the positive stud.
3. Connect the ground lead to the negative stud.
FIGURE 6. Logic Power/Ground
4. Locate the 2-pin Deutsch receptacle (Logic Power) on the AccuBoom control cable.
5. Locate the 2-pin Deutsch plug labeled Aux Controller Pwr in the access panel.
6. Remove the cap and connect it to the AccuBoom control cable.
Aux Controller
Pwr
