Raven AccuBoom Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 26

background image

C

HAPTER

3

10 RoGator (Liquid/AirMax 180) & TerraGator (Liquid/AirMax/AirSpread) AccuBoom™ Installation Manual

FIGURE 2. AccuBoom Control Cable Installed

4. Locate the 12-pin Deutsch connectors labeled Section T in the access panel.
5. Disconnect the connectors.
6. Connect the TO MASTER MODULE connector to the mating connector of the AccuBoom harness cable.
7. Connect the TO ARMREST SWITCH connector to the mating connector of the AccuBoom harness cable.
8. Connect the large, rectangular node connectors on the harness cable into the AccuBoom node (P/N 063-0172-

714).

NOTE:

Do not force the connection. The node and cable are designed to connect only if the plug and

connector are correctly oriented.

9. Tighten the bolts on the node connectors to secure the connection.
10. TerraGator (Liquid/AirMax/AirSpread) Only

a. Locate the diode splice pack labeled DP Master Apply in the access panel.
b. Remove the splice pack and connect the cable to the end of the AccuBoom harness cable labeled

MASTER APPLY.

c. Reconnect the splice pack to the AccuBoom harness cable.

FIGURE 3. DP Master Apply Connection

«
...
12
13
14
15
16
...
»

Содержание AccuBoom



























Отзывы:

Нет отзывов

Похожие инструкции для AccuBoom

Бренд: Paradyne Страницы: 86

Ergopower Record 12s

Бренд: CAMPAGNOLO Страницы: 124

Бренд: CAMPAGNOLO Страницы: 100

Бренд: Unisen Страницы: 9

Бренд: Zavoli Страницы: 26

Бренд: hepco & becker Страницы: 4

Energy Hub EH128L

Бренд: TBB power Страницы: 24

Бренд: Hama Страницы: 38

Soft Luggage Pannier Racks

Бренд: Honda Страницы: 10

Бренд: Paxton Automotive Страницы: 85

Бренд: Thule Страницы: 8

Бренд: Omnimount Страницы: 16

Бренд: Happy Trails Страницы: 3

Бренд: Olympus Страницы: 14

Бренд: Ikan Страницы: 6

Бренд: Campbell Страницы: 18

Бренд: BAFANG Страницы: 6

Бренд: SciQuip Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды