Raven AccuBoom, Калибровка и руководство по эксплуатации

Страница: 20 / 24

C
HAPTER
4
16 ROS AccuBoom™ Calibration & Operation Manual
ACCUBOOM OPERATION
If the Enable AccuBoom option is enabled prior to starting a job, no additional steps are necessary to begin
automatic section control features. Refer to the Raven Operating System Basic Operation Manual for assistance
using scout groups and the Scouting widget to create field boundaries and zone features.
The AccuBoom Override widget is required to enable AccuBoom, or adjust AccuBoom settings, during an active
job. Refer to the Raven Operating Software Basic Operation Manual for details on adding widgets to guidance
screens.
ENABLE ACCUBOOM
To enable AccuBoom during an active job:
NOTE: The vehicle must be stopped to change AccuBoom settings or options during a job.
1. Touch and hold the AccuBoom Override widget to display the AccuBoom Settings prompt.
2. Select the Enable AccuBoom option to enable the AccuBoom feature.
ENABLE ACCUBOOM OVERRIDE
To override all sections on for the configured override time:
NOTE: The vehicle must be stopped to change AccuBoom settings or options during a job.
1. Tap the AccuBoom Override widget.
AccuBoom will override all enabled sections on for the configured override time and will display a countdown
until the override time expires and automatic section control is resumed.
ADJUST ACCUBOOM SETTINGS DURING A JOB
To make adjustments to the AccuBoom feature without closing or exiting an active job:
NOTE: The vehicle must be stopped to change AccuBoom settings or options during a job.
1. Touch and hold the AccuBoom Override widget to display the AccuBoom Settings prompt.
2. Refer to theAccuBoom Look Ahead Settings Tab section on page 11 for assistance with the look ahead settings.
AccuBoom
Override
AccuBoom