Raven AccuBoom, Калибровка и руководство по эксплуатации

Страница: 15 / 24

3
Manual No. 016-1001-087 Rev. E 11
Calibration:
2. Locate and select the Combo Node button. The Combo Node Configuration tab will display.
AccuBoom Only. The AccuBoom Only option is only necessary for specific OEM factory installed AccuBoom
systems. Leave this option disabled unless instructed by a Raven technician or dealer.
NOTE: Some OEM applications of AccuBoom require both an AccuBoom combo node (P/N 063-0172-714)
and boom/speed node for section control capabilities. If AccuBoom came installed as an OEM option
from the equipment manufacturer, contact a local implement dealer for additional assistance.
Use Master Switch. This option allows the system to display section status, and field coverage, based upon the
section status reported by the AccuBoom node. Leave this option disabled unless instructed by a Raven
technician or dealer.
NOTE: If the master switch option is selected, the orange wire with white stripe on the AccuBoom node
harness must be connected to the machine master switch.
Contact a local Raven dealer for more information on part numbers and availability of this AccuBoom
feature for specific equipment models. Contact the machine manufacturer for more information on
connecting the master switch feature.
ACCUBOOM LOOK AHEAD SETTINGS TAB
1. Touch the Edit icon in the Machine Configuration panel to expand the panel.
Edit
AccuBoom
AccuBoom
Settings