port of the vacuum for inflation. Insert the adapter into the air valve
and lock into place by turning clockwise.
Inflate until the tube is firm and resistant to pressure. Your fist should
create only a slight depression when pushed against the tube and the
surface should be stretched taut in all directions. Replace cap to
ensure an air tight seal.
NOTE:
It is normal for the air pressure within the tube to fluctuate depending
on air and water temperatures. It may be necessary to increase or
decrease the air pressure in your product accordingly. To avoid
damage on extremely hot days it may be necessary to check and
release the air pressure from your product throughout the day.
C A U T I O N
DO NOT OVER-INFLATE.
Do not exceed 2 PSI if filling with compressed
air. Excessive pressure can cause the tube to
rupture with potentially damaging force to
eyes, ears, skin and limbs. Use of an air
compressor or over-inflation can rupture the
tube beyond repair, thus voiding the warranty.
!!
6
