Attaching the ladder
Step 1:
Curved portion
The ladder consists of two pieces: a ladder with
straps and a molded plastic ladder stabilizer.
Orient the stabilizer on the notched side of the top
two ladder steps and the curved portion is facing
upwards towards the top of the ladder. While
maintaining this orientation, flip the ladder upside
down to expose the underside of the steps.
Step 2:
Line up the large opening of the keyhole slots
with the four bolts on the underside of the top two
steps.
Step 3:
Slide the stabilizer towards the ladder to fully
engage the bolts in the narrow end of the slots.
Tap the stabilizer with your hand to ensure the
bolts are fully engaged in the slots.
Note: If the stabilizer feels loose after mounting,
tighten the bolts slightly leaving minimal clearance between the bolt
flange and the plastic stabilizer. This slight clearance will allow the
stabilizer to be easily removed by hand (without tools) for storage.
To remove stabilizer, simply slide in opposite direction.
7
