14
OPERATION – see Fig. III
Burner control
Position 1
– Gas supply to the burner is closed
Position 2
– Lighting up
To ignite the burner, press the knob and turn it to position 2. At the same
time put a burning match, fire lighter or other source of flame to the
respective burner. After you have ignited the burner, put it to the required
flame size.
Position 3
– Maximum flame
Position 4
– Minimum flame
CAUTION!
The cooker is not equipped with a piezo igniter. To ignite the burner, you need an external ignition source
(match, gas lighter etc.).
CAUTION!
Control the flame.
The device does not have a flame failure device.
This means that if the flame goes out
accidentally, the gas will go through the burner until the cylinder has been totally emptied. For this reason use
the device only
OUTSIDE.
Do not use this device in residential premises.
COOKER SETUP
Place the cooker on a stable, level surface. Ensure the minimum distances from the sides and back. Ensure the
minimum distance as shown in Fig. below.
