7105-M007-0
INSTRUCTIONS FOR
ASSEMBLY AND USE
Page 13 of 19
GB
G1000A99NP - G800A121NP
7 - Fix the three pneumatic pipes (
Fig.
_
15 ref.
_
1-2-3
)
coming from the pedalboard of the lifting device to
the lifting cylinder and to the machine as indicated
in
Fig. 15
.
- Pipe coming from the filter unit - pressure re-
ducer (# 317007) (L=100 mm) (
Fig.
_
15 ref.
_
1
).
- Pipe coming from the lifting device's cylinder (#
317022) (
Fig.
_
15 ref.
_
2
) (L= 1000 mm) (low
union).
- Pipe coming from lifting device's cylinder (#
317022) (
Fig.
_
15 ref.
_
3
) (L= 1200 mm) (high
union).
Reassemble the guard demounted before (see
Fig.
_
14 ref.
_
4
).
BEFORE CONNECTING THE PIPES
(FIG. 15 REF. 2-3), MAKE SURE
THEY PASS THROUGH THE RUB-
BER FAIRLEAD PLACED ON THE
MACHINE BASE AND THE LIFTING
DEVICE FRAME.
Fig. 15
Fig. 16
FASTEN THE PIPES AS SHOWN
IN FIG. 16, IN ORDER TO AVOID
THAT THEY INTERFERE WITH
THE BELT.
ONCE THE ASSEMBLY OPERATIONS HAVE
BEEN ENDED, CHECK ALL MACHINE FUNC-
TIONS.
IF IN DOUBT DO NOT USE THE
MACHINE AND REFER TO PRO-
FESSIONALLY QUALIFIED PER-
SONNEL (OR TO THE SELLER).
10.0 CONTROLS
The lifting device is activated through a ‘held action’
pedal, fixed through an appropriate frame to the tyre-
changer, on which the device is assembled.
Pulling the pedal downwards the lifting device starts its
rise while, on the contrary, pulling the pedal upwards
the lifting device starts descending.
Releasing the pedal at any time will provoke the lift-
ing devices stop in the position in which it finds itself.
