MCX300 AM-FM Tuner and Cassette Tape Player—Installation and Operation
Page 7 of 8 (Jul-98)
audio adjustments can be tried initially. Make adjustments as needed to obtain the
desired performance. You may find it helpful to play the unit through its monitor
speaker for the initial settings.
Important:
The Balance and Fader adjustments affect the level and quality of the audio. and
should be adjusted to the midpoint or “centered” position.
2XWGRRU$QWHQQDV
The attached IL0153 suggests a grounding system for an AM/FM antenna system;
the attached KM0710 illustrates a way of mounting the AM and FM antennas.
The following Rauland-Borg parts are used in the suggested system:
FMT-65 FM Antenna.
LV0027 AM/FM Antenna Coupler, which includes:
9
The coupler itself.
9
An outdoor housing.
9
Two screws for mounting the coupler inside the housing.
9
A “U” bolt and related hardware for mounting the housing to the mast.
QC0126 Lightning Arrestor. This includes the hardware needed to mount the
coupler to the mast.
The remaining parts shown in KM0710 (wires, coaxial cable, the antenna-mounted
matching transformer, “F” connectors, the masts, and the AM insulators) are
readily available from suppliers.
Important:
Mount the parts firmly to the mast, as shown in the illustrations, to properly
ground the antenna system.
Operating Instructions
Refer to the separately supplied vendor's instructions for the tuner and cassette
player’s operation and care.
The Monitor-Program Switch
The
MCX
300 includes a front-panel speaker and a four-position switch:
