MCX300 AM-FM Tuner and Cassette Tape Player—Installation and Operation
Page 5 of 8 (Jul-98)
3DFNLQJ/LVWDQG8QSDFNLQJ3URFHVV
The MCX300 comes completely assembled. The only separate items besides the
main chassis are the AM/FM cassette receiver manual, the 12-VDC power supply
and the screws, washers, & self-retaining nuts for fastening the chassis to the rack:
Supplied Parts
Quantity
Part
Part Number
1
12-VDC power supply.
PS12
4
Black #10 flat washers.
WJ0305
4
Fiber washers.
WL0315
4
#10-32 self-retaining nut fastener.
AB3640
4
Black machine screws (#10-32
×
5
/
8
" pan-head
Phillips).
B0439
1
Manufacturer’s AM/FM Cassette Radio
Manual
none
Parts to be Supplied by the Installer
Quantity
Part
1
FM antenna with mast and supporting hardware.
1
AM antenna wire with mast and hardware.
1
AM/FM antenna coupler and protective housing.
1
75 W shielded coaxial cable from the antennas to the tuner.
1
Lightning-protection system.
1
Shielded cable to connect the MCX300 to a sound or communications
system. One end should have an
RCA
-type phono plug; the other, a
suitable connector for the sound or communication system’s Auxiliary
or Tuner input.
Equipment Damaged in Transit: This equipment was carefully inspected and
tested at the factory before it was shipped. If it has been damaged in transit, notify
the transportation company immediately to place your claim.
5HTXLUHG$QWHQQD
An external 75-ohm antenna is required for the AM-FM tuner. The type of antenna
to use depends upon the equipment’s location within the building and the strength
