Rauch QUANTRON-K2, Инструкция по эксплуатации

Страница: 44 / 102

Operation QUANTRON-K2 4
38
4.5.6 Half-side slide
If the Dispersion AUTO function is deactivated , you can manually enter the
value for positioning the half-side slide in the Half-side slide submenu.
Positioning occurs in increments of 0.5 but you can enter values between 0 and
9 after the comma. If you enter a value exceeding 5.0, an error message will pop
up and the previous value will be retained.
NOTICE
When the Dispersion AUTO function is active , the following values are auto-
matically adjusted when the spreading width is changed:

Spreading width limitation

Metering slide position

Half-side slide position

Disc speed ( only for the HydroControl version ).