Rauch QUANTRON-A, Инструкция по эксплуатации

Страница: 68 / 120

Operation QUANTRON-A 4
62
4.7.2 AUTO/MAN mode
The default operating mode is AUTO . The control unit automatically controls the
actuators based on the speed signal.
You will only work in the
manual mode in the following cases:

No speed signal (radar or wheel sensor not available or defective),

Spreading of slug pellets or seeds (fine seeds).
Selecting the operating mode
1.
Switch on the QUANTRON-A control unit.
2. Open the menu Machine settings > AUTO/MAN mode .
3. Select the desired menu item.
4. Press the enter key .
5. Follow the instructions on the screen.

Important information on the use of the operating modes during spreading is
provided in chapter
5: Spreading operation using the QUANTRON-A control
unit, page 91 .
AUTO km/h + AUTO kg: automatic operation with automatic mass flow
control:
AUTO km/h + AUTO kg
operating mode continuously controls the fertiliser
quantity during spreading according to the forward speed and the flow behaviour
of the fertiliser. This optimises the metering of the fertiliser.
NOTICE
For even spreading of the spreading material, you need to work at a constant
forward speed in manual mode.
Menu Meaning Description
AUTO km/h + AUTO kg AXIS only : Selection of automatic
operation with automatic weighing
Page 62
AUTO km/h Selection of automatic mode Page 97
MAN scale Metering slider adjustment for
manual mode Page 99
MAN km/h Forward speed adjustment for
manual mode Page 98
NOTICE
The specified operating mode is displayed on the operating screen.