Maintenance and service
45
9
9
Maintenance and service
9.1
Safety
Maintenance and service work involves additional hazards that do not occur dur-
ing operation of the machine.
Any maintenance and service work is to be conducted with increased alertness
at all times. Work particularly thoroughly and cautiously.
Observe the following instructions in particular:
Only experts may perform welding work.
Spare parts must at least comply with the technical standards specified by the
manufacturer. This is assured e. g. with RAUCH original spare parts.
Before starting any cleaning, maintenance, or repair work, and when trouble-
shooting, switch off the tractor's engine and wait until all rotating parts of the
machine have come to a stop.
Only an
instructed and authorised workshop
may carry out repair work.
NOTICE
Arrange for your dealer to carry out major servicing work.
n
WARNING
Danger of tipping due to lifted machine
Tipping over of the machine may lead to crushing and fractures.
Secure the machine using suitable supports.
n
WARNING
Danger of crushing and shearing due to metering slide
Ejected spreading material may lead to injuries.
Ensure that nobody is present in the hazard zone.
NOTICE
Please also refer to the warning notes in chapter
. Take par-
ticular note of the instructions in the section
Содержание K 51
