Machine settings
7
30
7.2
Adjusting the spreading width limiter
The different positions of the spreading width limiter allow for spreading widths
between approx.
0.5 m - 5 m
. The spreading width depends on the quality of the
spreading material.
Setting:
Figure 7.2:
Spreading width limiter
[1]
Star knobs for adjusting the spreading width limiter plates
[2]
Spreading width limiter plates
1.
Select the side to be set.
2.
Loosen the lateral star knob.
3.
Loosen the rear star knob.
4.
Bring the spreading width limiter plate [2] in the desired position.
Spreading width limiter plate
upwards
: The spreading width is
increased
.
Spreading width limiter plate
downwards
: The spreading width is
de-
creased
.
5.
Fasten star knobs.
The new spreading width is set.
6.
Check the spreading pattern (visual inspection or scale) and adjust the set-
ting, if necessary.
NOTICE
Check the proper condition of the spreading width limiter. Damaged or bent el-
ements of the spreading width limiter affect the spreading pattern.
2
1
Содержание K 51
