Rauch AXMAT DUO, Инструкция по эксплуатации

Страница: 27 / 44

Operating the AXMAT system
23
4
Run the spreading test with the openings set as calculated for the job:

See 4.2: AXMAT calibration, page 24 .
If you only have 5 measuring tubes, proceed as follows:
1. Pour the contents of the first 5 collecting vessels into the measuring tubes
from the left-hand side.
2. Note the values of the measuring tubes.
3. Empty the measuring tubes and pour the contents of the next 4 collecting
vessels into the measuring tubes from the left-hand side.
4. Note the values of the measuring tubes.
NOTICE
If the quantity collected in the collecting vessels is insufficient, repeat the
passage.
Do not change the adjustment of the metering slides.
NOTICE
You can obtain additional measuring tubes from your dealer.