Rauch AXIS EMC ISOBUS, Оригинальное руководство пользователя, Страница: 90 / 102

u To change the metering slide opening, press the MAN+ or MAN- function key.
w
L% R% for selecting the side of the metering slide opening
w
MAN+ to increase the dosing slider opening or
w
MAN- to reduce the dosing slider opening.
In order to achieve an optimum spreading result in manual mode as well, we
recommend using the metering slide opening and forward speed values provided in
the fertilizer chart.
5.11 GPS control
The machine control unit AXIS EMC ISOBUS can be combined with an ISOBUS terminal with
SectionControl. Various data is exchanged between both devices to automate control.
The ISOBUS terminal with SectionControl communicates the specifications for the opening and
closing of dosing sliders to the machine control unit.
The A symbol next to the spreading wedges indicates that the automatic function is enabled. The
ISOBUS terminal with SectionControl opens and closes the individual sections depending on the
respective position in the field. The spreading starts only after when you press
Start/Stop .
WARNING!
Risk of injury due to discharged fertilizer
The SectionControl function automatically starts the spreading operation without warning.
Ejected fertilizer can harm the eyes and nasal mucous membranes.
There is also a risk of slipping.
▶
Ensure that nobody is present in the hazard zone during the spreading operation.
During spreading, one or several sections can be closed at any time. If the sections are activated for
automatic operation again, the last state requested is restored.
If the ISOBUS terminal with SectionControl is changed from automatic to manual mode, the machine
control unit closes the metering slides.
For the use of the GPS control functions of the machine control unit, the GPS-Control setting in
the Machine settings menu must be activated!
5. Spreading operation
90
5902180-h-gb- AXIS EMC ISOBUS