Rauch AXIS EMC ISOBUS, Оригинальное руководство пользователя, Страница: 67 / 102

If required, you can stop the movement of the hopper cover by pressing the Stop key. The hopper
cover then remains in the intermediate position until you close or open it completely.
4.12 Special functions
4.12.1 Changing the system of units
Your system of units has been preset at the factory. However, the system can be changed from metric
to English units at any time.
Due to the great variety of different ISOBUS-compatible terminals, this chapter is limited to the
functions of the electronic machine control system without indicating a specific ISOBUS terminal.
• Please observe the instructions for the operation of your ISOBUS terminal in the
corresponding operator's manual.
u Open the Settings menu for the terminal system.
u Access the menu Unit.
u Select the desired unit system from the list.
u Press OK.
All values of the various menus are converted.
Menu/value Conversion of metric to imperial units
kg left 1 x 2.2046 lb.-mass (lbs left)
ha left 1 x 2.4710 ac (ac left)
Working width (m) 1 x 3.2808 ft
Rate(kg/ha) 1 x 0.8922 lbs/ac
Mounting height cm 1 x 0.3937 in
Menu/value Conversion of metric to imperial units
lbs left 1 x 0.4536 kg
ac left 1 x 0.4047 ha
Working width (ft) 1 x 0.3048 m
Appl. rate (lb/ac) 1 x 1.2208 kg/ha
Mounting height in 1 x 2.54 cm
4. Operation
AXIS EMC ISOBUS 5902180-h-gb-
67