Rauch AXIS EMC ISOBUS, Оригинальное руководство пользователя, Страница: 38 / 102

The calibration must either be conducted with a running PTO at a standstill or while driving over a test
section.
• Remove both spreading discs.
• Move the drop point to the calibration position (value 0).
Entering the working speed:
u Access the menu Fertiliser settings > Start calibration.
u
Enter the average working speed.
This value is required for calculation of the slider position during calibration.
u Press the Continue button.
The new value is saved in the machine control unit.
The second calibration page is displayed.
Select the section
u Set the spreader side on which the calibration is to be carried out.
Press the function key of the left spreading side.
Press the function key of the right spreading side.
The icon indicating the selected spreader side has a red background.
WARNING!
Risk of injury during calibration
Rotating machine parts and discharged fertilizer could cause injury.
▶
Before starting the calibration, ensure that all requirements have been met.
▶
Observe the calibration chapter in the operator’s manual for the machine.
4. Operation
38
5902180-h-gb- AXIS EMC ISOBUS