Rauch Axent Isobus, Инструкция по эксплуатации

Страница: 33 / 74

Operation AXENT ISOBUS
27
4
4.3 Interaction between both machine control units
Lime spreading requires pre-settings in the AXIS H ISOBUS machine control
unit.
1. Switch on the AXIS H ISOBUS machine control unit.
1. In the Machine settings menu, select the AUTO km/h operating mode.
2. In menu Fertiliser settings > Spreading disc , select type U2.
Figure 4.3: Transmission of fertiliser settings from AXIS H ISOBUS
[1] Spreading disc type U2 for lime spreading unit
[2] Application rate
[3] Working width
[4] Flow factor
 The application rate [2], the working width [3] and the flow factor [4] are
transferred automatically at the AXENT ISOBUS machine control unit.
If the application rate at the lime spreading unit is incorrect, the flow factor can be
adjusted in percent in the AXIS H ISOBUS machine control unit.

In the Machine settings > Appl. rate corr. % menu, adjust the flow factor.
3
2
4
1