Rauch Axent Isobus, Инструкция по эксплуатации

Страница: 47 / 74

Operation AXENT ISOBUS
41
4
4.7.7 Forward speed calibration
The speed calibration is the basic requirement for an exact spreading result. Fac-
tors such as tyre size, slippage between tyres and ground, ground characteristics
and tyre pressure influence the speed measurement and therefore the spreading
result.
Preparing the speed calibration:
The exact calculation of the number of speed pulses over 100 m is very important
for the precise discharge of the fertiliser quantity.

Conduct the calibration on the field. This reduces the influence of the ground
characteristics on the calibration result.

Determine a 100 m long reference track as precisely as possible.

Fill only half of the machine, if possible.
Opening the speed settings:
In the AXENT ISOBUS control unit, you can save up to 4 different profiles for
the type and number of pulses. You can assign names to these profiles (e.g. trac-
tor name).
Before spreading, check that the correct profile is opened in the control unit.

Open the Machine settings > Tractor (km/h) menu.
Figure 4.13: Tractor (km/h) menu
[1] Active tractor profile
[2] Display of pulses on 100 m
[3] Profile is created, currently not used
[4] Tractor designation
[5] Empty tractor profile
1
2
4
5
3