Rauch Axent Isobus, Инструкция по эксплуатации

Страница: 35 / 74

Operation AXENT ISOBUS
29
4
4.5 Hopper cover (optional)
The AXENT large area spreader is equipped with an hydraulically controlled hop-
per cover. During the refilling process at the end of the field, the hopper cover can
be opened and/or closed via the control unit and 2 hydraulic valves.
Figure 4.5: Hopper cover menu
[1] Display of opening process
n
WARNING
Danger of crushing and shearing due to components operat-
ed by an external force
The hopper cover will move without warning and can cause per-
sonal injury.
 Ensure that nobody is present in the hazard zone.
NOTICE
The menu is only used for activating the valves to open or close the hopper cov-
er. The machine control unit AXENT ISOBUS does not detect the exact position
of the hopper cover.

Observe the movements of the hopper cover.
n
CAUTION
Material damage due to insufficient clearance
Opening and closing the hopper cover requires sufficient clear-
ance over the AXENT hopper. If the clearance is insufficient, the
hopper cover may tear. The rods of the hopper cover may be dam-
aged and the hopper cover may damage the environment.
 Ensure that there is sufficient clearance above the hopper
cover.
1