Fig. 1: Hazard zone when devices are pulled
A
Hazard zone in spreading operation
B
Hazard zone when coupling/decoupling the
machine
•
Ensure that no persons are present in the spreading range [A] of the machine.
•
Immediately stop the machine and the tractor if persons are present in the hazard zone of the
machine.
•
When coupling/decoupling the machine at the tractor, make sure that no one is present in the
hazard zones [B].
3.5.5
Running operation
•
In the event of malfunctions, the machine is to be shut down and secured immediately against
reactivation. Have the fault repaired immediately by qualified technicians.
•
Do not climb on the machine while the spreader unit is running.
•
Only operate the machine with the protective grids in the hopper closed. During operation, the
protective grid must
neither be opened nor removed
.
•
Rotating machine components can cause serious injury. Make sure that body parts or clothing
never come close to rotating components.
•
Do not deposit any parts (such as screws, nuts) in the hopper.
•
Ejected spreading material may cause serious injury (e.g., to the eyes). For this reason, ensure
that nobody is present in the spreading range of the machine.
•
If the wind speed becomes too high, spreading has to be stopped as the specified spreading
range cannot be guaranteed under such conditions.
•
Do not climb on the machine or the tractor when it is situated beneath high-voltage electrical
power lines.
•
Do not open or close the hopper cover when the machine is situated under high-voltage electrical
power lines.
3. Safety
14
5903360
AXENT 90.1
Содержание AXENT 90.1
Страница 119: ...12 Appendix 12 Appendix AXENT 90 1 5903360 119...
Страница 126: ......
