Rauch AXENT 90.1, Руководство оператора

Страница: 113 / 126

Checking the agitator head for wear or damage
u Checking the fingers of the agitator head for wear
Fig. 82: Agitator head wear range
The length of the fingers must not be less than the wear range (Z = 9 mm).
The fingers must not be bent.
9.15.3 Metering slide adjustment
n
Metering slide adjustment
Check the setting of the two metering slides for even opening before each spreading season and also
during the season, if necessary.
WARNING!
Danger of crushing and shearing due to externally-actuated components
When working on power-operated components (adjusting lever, metering slides), there is a
crushing and shearing risk.
Pay attention to the shear point of the metering slide opening and the metering slide during
adjustment.
u
Switching off the tractor engine
u
Removing the ignition key
u
Disconnecting the power supply between the tractor and the machine
u
Never operating the hydraulic metering slide during adjustment
Requirements:
•
The mechanical system must move freely
• Version K: The return spring is unhooked
• The hydraulic cylinder is unhooked
9. Maintenance and service
AXENT 90.1 5903360
113