Rauch AERO ISOBUS, Дополнительные инструкции

Страница: 47 / 66

u Access the menu Test/diagnosis > Metering RPM.
The display shows the status of the metering units.
The number of sections depends on the machine type.
• If your machine only has 4 sections/metering units, sections 5 and 6 are irrelevant.
Fig. 24: Test/diagnosis; Example: Metering RPM
[1] Number of sections/metering units
[2] Display of the target speed that has been
entered
[3] Display of the actual speed
[4] Revolution counter
[5] Resetting the revolution counter
[6] Metering module version
[7] Error display via status bits
u
The metering module version [6] must display at least 20308. This corresponds to version
2.03.08.
Please contact your dealer of your specialist workshop if the version is not correct.
The error/status bits are displayed for each metering unit in line Err [6]. If no error is present and no
calibration is executed, the line is blank. Several errors can be displayed at the same time. The
various states are described in the table below.
4. Operation
AERO ISOBUS 5903001
47