Rauch AERO ISOBUS, Дополнительные инструкции

Страница: 35 / 66

Fig. 15: Tractor profile
[1] Tractor name field
[2] Display of the number of pulses over 100 m
[3] Confirm the profile selection
[4] Delete profile
u Open Name field [1] .
u Enter the name of the profile.
The profile is active.
The name is restricted to 16 characters.
We recommend using the name of the tractor for ease of understanding.
The number of pulses of the speed signal must still be specified below. If the exact pulse count is
known, it can be entered directly:
u
From the selected tractor profile, select the Pulses/100m menu entry.
The Pulses menu is displayed for manual entry of the pulse count.
If the exact pulse count is unknown , start a calibration .
u
Press the calibration key in the tractor profile.
The calibration run operating screen is displayed.
u Press Start at the starting position of the reference distance.
The pulse display is now zero.
The machine control unit is ready for counting pulses.
u Drive along the 100 m long reference distance.
u Stop the tractor at the end of the reference distance.
4. Operation
AERO ISOBUS 5903001
35