Rauch AERO ISOBUS, Дополнительные инструкции

Страница: 33 / 66

Menu Meaning Description
MAN km/h Adjustment of forward speed for manual mode Page 58
Operating mode selection
u Start the machine control unit.
u
Access the menu Machine settings > AUTO/MAN mode.
u Select the desired menu item from the list.
u
Press OK.
u Follow the instructions on the screen.
We recommend having the flow factor displayed in the working screen. By doing so, you can
observe the mass flow control during spreading. See
2.1.2 Display fields .
• Important information on the use of operating modes for spreading operations is provided in
chapter
5 Spreading operation .
4.6.2 +/- quantity
In this menu, you can set the percentage increment of the application rate change for normal
spreading.
The preset value of the metering rollers serves as a basis (100%).
During operation, the Qu/ Quantity - function keys can be used to adjust the
application rate by the +/- Quantity factor at any time. The pre-configuration can be
reset with the C 100 % key.
Specifying the application rate reduction:
u
Access the menu Machine settings > +/- appl. rate (%).
u Enter the percentage by which the application rate is to be adjusted.
u
Press OK.
4.6.3 Forward speed calibration
The speed calibration is the basic requirement for a precise spreading result. Factors such as tire size,
a different tractor, all-wheel drive, slippage between tires and ground, ground characteristics, and tire
pressure influence the speed measurement and therefore the spreading result.
4. Operation
AERO ISOBUS 5903001
33