Rau 08-AT, Руководство по эксплуатации

Страница: 39 / 44

15
• The attachment of accessories that are not intended by RAU GmbH for the respective product.
• Repair, adjustment and maintenance without consideration of accident prevention regulations.
The workplace is built according to the state of the art and the recognized safety rules. Nevertheless,
dangers to the life and limb of the user or third parties or impairments on the table frame or other
material values may arise during use.
4. Transport, handling and storage
Please observe the transport instructions on the packaging and store adlatus workstations in the origi-
nal packaging in a dry place protected from direct sunlight in a temperature range between -20 ° and
+ 70 ° C, unless you have chosen a battery-operated version.
Store battery-operated versions in a temperature range between 0 ° and 45 ° C,
otherwise there is a danger of explosion!
The stability calculations were successfully carried out and tested in accordance with DIN EN 1570-1,
Chapter 5.1.3.
Dispose of the packaging according to the national and international regulations of your country.
5. Commissioning
Check the product for visible damage. If such exist, the product may not be used further.
5.1 Placement
Place the height-adjustable workstation on a solid, maximum 2,5% inclined ground in a dry
location. If you have selected a stationary version, you can level the workstation with the
adjustment plates. For a mobile version, secure the workstation via the parking brakes.
Crushing and shearing points are to be avoided and a minimum distance of 100
mm to head side neighbouring objects and/or workplaces must be observed. If the distance
is smaller, install the necessary shearing plate, see chapter 3.5, between them. Remove any
objects that could interfere with the vertical stroke of the workstation. The longitudinal posi-
tioning of workplaces with a distance of less than 100mm is not allowed.
Before starting operation, secure all moving parts so that they cannot fall down and cause injuries. An
accidental switch-on must be excluded.
5.2 Environmental conditions
Wait for commissioning until all components have reached a temperature range b10 ° and
+40 ° C.