5.6 Protocol Vehicle Status Code Meaning
：
Status Code(Decimal)
State Meaning
Remarks
33
Current anomaly
34
Turn the anomaly
35
Motor phase deficiency
36
Motor Hall anomaly
37
Brake anomaly.
30
Communication anomaly
3.7.
Install
P01
：
Backlight brightness, the darkest level 1, the brightest level 3;
P02
: mileage unit, 0: KM; 1: MILE;
P03:
Voltage level: 24V, 36V, 48V, 60V, 64V default 36V;
P04
: Dormancy time: 0, not dormancy; Other numbers are dormancy times, range: 1-60; Unit minutes;
P05
: Help file bit: 0, 3 file mode: 1,5 gear mode:
P06:
Wheel diameter: unit, inch;
Protocol 2 wheel diameter value: 5.0 ~ 50 Precision: 0.1 inch
5S protocol wheel diameter value: 0:16 inch, 1:18 inch, 2:20 inch, 3:22 inch, 4:24 inch, 5:26 inch,
6:700 C, 7:28 inch.
This parameter is related to the meter display speed and needs to be entered correctly;
P07
: Speed gauge magnetic steel number: Range 1-100.
This parameter is related to the meter display speed and needs to be entered correctly.
If it is an ordinary hub motor, the number of magnetic steel is input directly.
If it is a high-speed motor, it is also necessary to calculate the deceleration ratio, and the input data = the
number of magnetic steel × deceleration ratio.
For example: number of motor magnets 20, deceleration ratio 4.3: input data is: 86 = 20 × 4.3.
P08: Speed limit: Agreement No. 2 range 0-100km / H, 100 means no speed limit.
5S protocol 0-41km / H;
The input data here represents the maximum operating speed of the vehicle: for example, input 25,
indicating that the maximum operating speed of the vehicle will not exceed 25km/h; The drive speed is
maintained at the set value,
