Push-assistance Mode;
Push-assistance function may only be used when pushing the E-bike. Danger of injury
when the wheels of the E-bike do not have ground contact while use the push-assistance
function.
Switching the Lighting On/Off.
To switch on the headlight, hold the button for 2s. The backlight brightness is To switch on the
headlight, hold the button for 2s. The backlight brightness is automatically reduced. In the same
way to press the bbutton for 2s, the lighting can be switched off.
Switching the Lighting Mode On/Off Interface
Briefly, press "+" or "-" button to switch the E-bike system assistance level.
Change the motor output power.
The default assistance level ranges from level“0”to level“5”, The output power is zero on Level “0”.
Level “1” is the minimum power. Level “5” is the maximum power.
When you reach “5”, press the "+" button again, the interface still shows “5”, and blinks at“5”to
indicate the power highest.
After the power down shift reaches “0”, press the "-" button again, the interface still shows “0” and
blinks at “0”to indicate the power minimum.
The default value is level “1”.
Assistance Level Selection
