Page 6
Programming Options for SmartRescue
Step 7
Mount the front cover back onto the enclosure.
Step 8
Programming Options for SmartRecue
Option 1
Factory Default:
The Emergency Phones will call directly offsite and not stop at the SmartRescue. That phone’s button will
light at the SmartRescue during the call.
(Keep in Default Mode if site is not manned 24/7 to answer calls onsite)
Option 2
Program the SmartRescue to Allow the Emergency Phones to call the SmartRescue first, then outside
number(s):
(Used when staff are available at certain times to answer calls)
1. Hold down Red Disconnect and Submaster 1 buttons for 5 seconds
2. Release buttons (you will hear a confirmation tone)
3. Press Phone 2 button, then Red button, and then the Phone 1 button
4. Press Submaster 2 button, then Submaster 1 button (you will hear a confirmation tone)
*Note:
If you need to reprogram the SmartRescue back to Default Mode see page 13.
Programming the SmartRescue
