Ratek SWB10D Water Bath - Operating Manual
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Page 6 of 24
Colours:
Colours:
Colours:
Colours: Black on a yellow background
The water bath is powered by an alternating current power supply
sufficient to cause harm if contact with the electrical supply is made.
Under no circumstances should the user operate any part of the control
panel with moist, damp or wet hands.
This label is fitted by the manufacturer and must not be removed under
any circumstances.
Colours:
Colours:
Colours:
Colours: Black on a yellow background
The water bath is designed for heating water to temperatures that can
cause burns or scalding. Use extreme caution when working near hot
water to avoid injury. Under no circumstances should the heating element
be touched whilst in operation.
This label is fitted by the manufacturer and must not be removed under
any circumstances.
Colours:
Colours:
Colours:
Colours: Black on a yellow background
The water bath is powered by an alternating current power supply
sufficient to cause harm if contact with the electrical supply is made.
When emptying the water tank, the water bath should be disconnected
from the alternating current mains power supply, the water allowed to cool
to ambient air temperature and emptied by allowing the water to flow from
the end of the water tank furthest from the main control panel.
This label is fitted by the manufacturer and must not be removed under
any circumstances.
