background image

Ratek SWB10D Water Bath - Operating Manual 

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ 

Page 11 of 24

 

 
The maximum water depth is 35 millimetres below the tank rim. This level is just beneath the cradle 
wheels support rail and you should use this rail as a guide. 
 
The minimum filling level is 30 millimetres above the bottom of the oscillating cradle, or approximately 50 
millimetres from the bottom of the water tank. 
 
If the water level falls below this minimum level during operation, the water bath should be powered off, 
disconnected from the mains electrical supply and the water level topped up with cold water. Be aware 
that this will result in the rapid decrease in the water bath water temperature and the effect of this in 
relation to the current procedure being carried out must be considered. 
 
No liability will be accepted if in the normal course of operation the contents of the containers being 
heated and oscillated are damaged due to insufficient water levels or inappropriate temperatures being 
applied as a result of re-filling. 
 

 

Using The 

Using The 

Using The 

Using The Water Bath

Water Bath

Water Bath

Water Bath    

 
 

Filling The Water Tank

Filling The Water Tank

Filling The Water Tank

Filling The Water Tank    

    

 

    

-

 

The water bath should be filled by slowly pouring cold water (below 25° Celsius) into the end of the 
water bath furthest from the control panel, initially to 50% of the desired water level.  

 
-

 

Place the empty container/s to be used in the appropriate rack or tray and submerge in the water to 
gauge the displacement created by the containers. 

 
-

 

Continue filling the water tank the desired working level. 

 
-

 

Remove the containers. 

 
-

 

Avoid splashing as much as possible.    

    

    

    

Connecting Power

Connecting Power

Connecting Power

Connecting Power    

    

    

    

CAUTION

CAUTION

CAUTION

CAUTION 
The equipment must only be used with a protective earth power socket. The earth contact provides 
protection to the user and the equipment. If you do not have a protective earth power socket, or you are 
unsure as to whether you have a protective earth power socket, do not

do not

do not

do not connect the equipment. In such 

cases you should consult your workplace administrator or electrical maintenance staff to determine if a 
protective earth power socket is available. 
 
The mains power supply must be rated to match the power requirement as identified on the product 
identification label on the bottom left corner of the rear panel. This is normally expressed in the format of 
Voltage Range and Frequency. 
A surge protected power outlet is strongly recommended as it provides some protection for the 

A surge protected power outlet is strongly recommended as it provides some protection for the 

A surge protected power outlet is strongly recommended as it provides some protection for the 

A surge protected power outlet is strongly recommended as it provides some protection for the 
equipment in areas of poor electrical quality as well as providing som

equipment in areas of poor electrical quality as well as providing som

equipment in areas of poor electrical quality as well as providing som

equipment in areas of poor electrical quality as well as providing some protection against lightning 

e protection against lightning 

e protection against lightning 

e protection against lightning 

strikes. The equipment should be operated on a good, reliable supply of power at all times.

strikes. The equipment should be operated on a good, reliable supply of power at all times.

strikes. The equipment should be operated on a good, reliable supply of power at all times.

strikes. The equipment should be operated on a good, reliable supply of power at all times.    
    
Note: The water bath should not be operated on the same electrical circuit as other high voltage 
household appliances such as fridges, clothes dryers, washing machines or other continuous operation 
high voltage devices. These types of devices can create power fluctuations that are undesirable for 
sensitive medical equipment. Consult your workplace administrator or electrical maintenance staff if you 
are unsure. 
    
IMPORTANT : Use of an incorrect power supply will void the product warranty waive all liability for any 

IMPORTANT : Use of an incorrect power supply will void the product warranty waive all liability for any 

IMPORTANT : Use of an incorrect power supply will void the product warranty waive all liability for any 

IMPORTANT : Use of an incorrect power supply will void the product warranty waive all liability for any 
and all damage caused by such use. If you are unsure about the rating of your power supply, 

and all damage caused by such use. If you are unsure about the rating of your power supply, 

and all damage caused by such use. If you are unsure about the rating of your power supply, 

and all damage caused by such use. If you are unsure about the rating of your power supply, consult 

consult 

consult 

consult 

your workplace administr

your workplace administr

your workplace administr

your workplace administrator or electrical maint

ator or electrical maint

ator or electrical maint

ator or electrical maintenance staff to determine if

enance staff to determine if

enance staff to determine if

enance staff to determine if your power supply is suitable 

 your power supply is suitable 

 your power supply is suitable 

 your power supply is suitable 

for use with this product before connecting the power lead.

for use with this product before connecting the power lead.

for use with this product before connecting the power lead.

for use with this product before connecting the power lead.    

    

    

    

CAUTION

CAUTION

CAUTION

CAUTION    
Regularly check the mains power lead condition over the life of the product, and do not operate the 
equipment if you suspect there is damage to any part of the equipment or the mains power lead. 
 

Содержание SWB10D240

























Отзывы: