Raspberry Pi RASPIVEND, Быстрая справка

Страница: 26 / 51

9. MDBCoinSettings
GUI command
Command Parameters/Comments
MDBCoinSettings [none]
RASPIVEND daemon answer
Answer Parameters/Comments
{
"Type":"CoinSettings",
"Level":"3",
"CurrencyCode":"0040",
"ScalingFactor":"10",
"DecimalPlaces":"2",
"CoinValues":[
{"CoinValue":"1"},
{"CoinValue":"5"},
{"CoinValue":"0"},
{"CoinValue":"0"},
{"CoinValue":"0"},
{"CoinValue":"0"},
{"CoinValue":"0"},
{"CoinValue":"0"},
{"CoinValue":"0"},
{"CoinValue":"0"},
{"CoinValue":"0"},
{"CoinValue":"0"},
{"CoinValue":"0"},
{"CoinValue":"0"},
{"CoinValue":"0"},
{"CoinValue":"0"}
],
"ChangeCoins":[
{"ChangeCoin":"true"},
{"ChangeCoin":"true"},
{"ChangeCoin":"true"},
{"ChangeCoin":"true"},
{"ChangeCoin":"true"},
{"ChangeCoin":"true"},
{"ChangeCoin":"true"},
{"ChangeCoin":"true"},
{"ChangeCoin":"false"},
{"ChangeCoin":"false"},
{"ChangeCoin":"false"},
{"ChangeCoin":"false"},
{"ChangeCoin":"false"},
{"ChangeCoin":"false"},
{"ChangeCoin":"false"},
{"ChangeCoin":"false"}
],
"Manufacturer":"NRI",
"SerialNumber":"NRI00136295-",
"Model":"046G-46.F400",
"SWVersion":"12320"
} Using this command you can get informations about the MDB
connected coin acceptors/changers.
<CoinValues> array contains the values that the device will
recognize.
<ChangeCoins> array contains informations about the coins that
the device can use to return change. If all elements are “false”,
then the device does not have change capabilities.
Most of those are low level informations and you do not need to
use them in you application, since all MDB protocol will be
handled by the RASPIVEND board.
© 2016 – AUTOMATROM SRL – www.vendingtools.ro