Raspberry Pi RASPIVEND, Быстрая справка

Страница: 16 / 51

Value Description
0x00 Idle
0x01 Escrow request - An escrow lever activation has been detected.
0x02 Changer Payout Busy - The changer is busy activating payout devices.
0x03 No Credit - A coin was validated but did not get to the place in the system when
credit is given.
0x04 Defective Tube Sensor - The changer has detected one of the tube sensors
behaving abnormally.
0x05 Double Arrival - Two coins were detected too close together to validate either
one.
0x06 Acceptor Unplugged - The changer has detected that the acceptor has been
removed.
0x07 Tube Jam - A tube payout attempt has resulted in jammed condition.
0x08 ROM checksum error - The changers internal checksum does not match the
calculated checksum.
0x09 Coin Routing Error - A coin has been validated, but did not follow the intended
routing.
0x0A Changer Busy - The changer is busy and can not answer a detailed command
right now.
0x0B Changer was Reset - The changer has detected an Reset condition and has
returned to its power-on idle condition.
0x0C Coin Jam - A coin(s) has jammed in the acceptance path.
0x0D Possible Credited Coin Removal – There has been an attempt to remove a
credited coin.
0xFF Not known or not initialized status
Table 3: Coin acceptors/changers status codes
© 2016 – AUTOMATROM SRL – www.vendingtools.ro