WARRANTY
Rasor
®
Elettromeccanica S.r.l.
cutting unit has a 12 month warranty from the date indicated
on the last page of this manual, except in case of different written agreements.
The warranty covers all manufacturing and material defects. Replacement and repair operations
are covered only if carried out by our company and at our workshop.
The material to be repaired must be sent CARRIAGE FREE.
Once the machine has been repaired, it will be sent CARRIAGE FORWARD to the customer.
The warranty covers neither technicians' intervention on site nor the machine disassembly
from the installation place.
If for practical reasons, one of our technicians is sent to the premises, the customer will be
charged the costs plus the travelling expenses.
The warranty does not include:
+
failure caused by wrong use or assembly,
+
failure caused by external agents,
+
failure caused by lack of maintenance or neglicence;
+
blades and parts subject to wear.
WARRANTY FORFEITURE:
+
In case of arrearage or other breaches of contract,
+
Whenever changes or repairs are carried out on our cutting units without our prior
authorization,
+
Whenever the serial number is tampered with or cancelled,
+
Whenever the damage is caused by improper use, bad treatment, bumps, falls and
other causes not due to normal working conditions,
+
Whenever the unit seems tampered with, dismantled or previously repaired by
unauthorized staff,
+
In case the cutting units are used for purposes that are different from the ones
described in this manual.
All repair operations carried out under warranty do not interrupt its duration.
All disputes will be settled in the court of justice of Milan (Italy).
We thank you in advance for the attention you will pay to this manual and we invite you to
inform us of any change you deem necessary to improve it and make it more complete.
Enfocus Software - Customer Support
Содержание GRT10
Страница 1: ...use manual GRT10 THREE PHASE CUTTING UNIT ...
