EN
7. FIELD OF APPLICATION
6. NOISE LEVEL
NOTE
It is advisable for cutting unit GRT10 owners to verify the compliance with the standard
concerning safety of workers: Italian legislative decree 81/08.
The maximum acoustic pressure level emitted by cutting unit GRT10 is about 60 dB (A).
Noise tests have been carried out in compliance with Standard UNI EN ISO 11202. The
device noise levels, measured at different distances (without any sound wave filtering system),
vary in the extent of few db (A).
Cutting unit GRT10 has been designed, manufactured and assembled to cut any kind of
fabrics or materials, with the exception of metal, plastic or wood, by means of rotary poligonal
blades. This equipment must not work:
-
in areas prone to explosions;
-
in presence of fine dust or corrosive gases;
-
on wet or damp materials;
-
to cut plastic, metal and wooden materials.
It is forbidden to use cutting unit GRT10 for purposes different from the above-
mentioned ones.
5. TECHNICAL FEATURES
The technical data are only indicative and they can be changed without notice.
100 mm with hard metal
counterblade
550 rev./min
about 35 mm
Three-phase-Asynchronous, 75 W
(IP65-CL F)
0.36 A
2800 g
3800 g
1.5 m
LUX 200
< 2.5 m/s
2
0 ~ 55°C
10 ~ 95% without condensate
Cutting working depth
Motor power
Weight (with feeding cable)
GRT10 cutting unit features
Blade diameter
Blade speed
Max. absorption
Working temperature
Working humidity
Weight (with package)
Electric cable length
Minimum luminosity for working
operations
Vibration at the start up
6 side blade Ø 100 mm in H.S.S. steel
circular blade Ø 100 mm in Extra steel
4 side blade Ø 100 mm, in Extra steel
6 side blade Ø 100 mm in H.S.S. steel
covered with Teflon®
cutter circular blade Ø 100 mm, in
Extra steel
6 side blade Ø 100 mm in integral hard
metal
10FR
10EMD
10EHSSTF
Features of the available blades
10EHSS
10CSW
10SEXTG
23
Enfocus Software - Customer Support
Содержание GRT10
Страница 1: ...use manual GRT10 THREE PHASE CUTTING UNIT ...
